SV-AP-PANEL Autopilot Panel Installation
SkyView HDX System Installation Manual - Revision E 17-3
17.2 Electrical Installation
The SV-AP-PANEL has two (2) SkyView Network connections (D9M connectors). Both
connectors are electrically identical and are internally connected. Thus, the SV-AP-
PANEL can be installed in the SkyView Network as a “pass-through” device, or “daisy
chained” from one (1) SkyView Network device, through the SV-AP-PANEL, to the next
SkyView Network device. The SV-NET-1.5CC is an 18-inch (45.72 cm) SkyView Network
cable that is ideal for such situations. The SV-AP-PANEL receives power (for operation
of the buttons) from SkyView Network. Dimming of the SV-AP-PANEL is controlled by the
SkyView display(s).
To Next Page
Loading...
