Navigation Mapping Setup
22-8 SkyView HDX System Installation Manual - Revision E
3. Go to the Load Files Wizard (SETUP MENU > SYSTEM SOFTWARE > LOAD
FILES…).
4. Select a file and press:
a. LOAD to load the file onto the system.
5. Exit Setup.
6. In SkyView systems that have more than one (1) display, databases are
automatically synchronized to other connected displays provided that those
displays are connected via Ethernet. If they are, and you have the MAP page up
on other displays, you may see a SYNCHRONIZING DATABASES message
appear as this process occurs, followed by a display reboot. If you do not have
your displays connected via Ethernet, simply load the database to each screen
individually.
22.2.8 Removing Databases
SkyView automatically removes old databases when new databases are installed.
Databases can also be removed manually by going to SETUP MENU > LOCAL DISPLAY
SETUP > INSTALLED DATABASES. Highlight the database you wish to remove, and
then press the REMOVE button.
Aviation Data updates are published periodically by Dynon Avionics,
PocketFMS, and Jeppesen. It is the user’s responsibility stay current with
these updates and keep their equipment up to date.
To Next Page
Loading...
