Display Operation
21-8 SkyView HDX System Installation Manual - Revision E
21.6.1 SETUP MENU
This menu contains links to system configuration options:
• SYSTEM EVENT.
• SYSTEM SOFTWARE.
• SYSTEM SETUP.
• LOCAL DISPLAY SETUP.
• PFD SETUP.
• EMS SETUP.
• MAP SETUP.
• AUTOPILOT SETUP.
• TRANSPONDER SETUP.
• TRAFFIC SETUP.
• ADS-B STATUS.
• COM RADIO SETUP.
• HARDWARE CALIBRATION.
Note that this menu occupies the entire screen. The menus above have menus of their
own. The information in this section contains information on the purposes of each of the
above menus, as well as a list of each menu's respective menus and their functions.
Pages and wizards that require users to do something have explicit onscreen
instructions. Most actions are simple enough and onscreen instructions are
more than adequate. In these cases, explicit instructions are not contained in
this manual. In cases where onscreen instructions are not present, instructions
are included in this manual.
The menu options descriptions in this section are intended to be introductory
/ overview, not comprehensive. Comprehensive explanations of menu options
can be found onscreen, in the SkyView system, in the installation instructions
in the specific section of this manual for each subsystem, such as SV-EMS-
220 or SV-XPNDR-261.
21.6.2 SYSTEM EVENT Menu
The SYSTEM EVENT menu will only appear if the SkyView display detects that a “system
event” has occurred on (one (1) of your) SkyView display(s).
To Next Page
Loading...
