Dynon SkyView HDX - How to Load and Delete Files; How to Export Data Logs and Waypoints

Display Operation
21-18 SkyView HDX System Installation Manual - Revision E
4. Save the settings file onto the flash drive by pressing EXPORT or press CANCEL
to return* to the SYSTEM SOFTWARE menu.
21.7.3 How to Load and Delete Files
1. Download file from www.dynoncertified.com/software-updates.php such as terrain
or EMS files or use another source for the SkyView file.
2. Copy the file onto your USB flash drive. The file must be in the root directory of the
drive in order to be recognizable by the display.
3. Insert the USB flash drive into one (1) of the display’s USB sockets.
4. Go to the Load Files Wizard (SETUP MENU > SYSTEM SOFTWARE > LOAD
FILES…).
5. Select a file and press:
a. LOAD to load the file onto the system.
b. CANCEL to return to the SYSTEM SOFTWARE menu.
c. REMOVE to delete the file from the USB flash drive.
21.7.4 How to Export Data Logs and Waypoints
EXPORT DATA LOGS
Data logging, and how to export data logs is discussed in depth in Appendix F: User Data
Logs.
EXPORT USER WAYPOINTS
This option exports all the User Waypoints that are currently stored in your SkyView
system.
EXPORT DYNON DIAGNOSTIC FILE
This specialized data log can only be interpreted by Dynon Avionics Engineers; there is
no data in it that can be interpreted by SkyView pilots. Dynon Avionics Technical Support
may request this log during troubleshooting, especially for issues related to AP
performance. Note that this log is very big – over 500 MB – and takes minutes to save to
a USB flash drive. Unless directed to export this log by Dynon Avionics, there is no reason
to do so. This file is too large to send in an email message.
If you have more than one (1) SkyView display in your system, you may be requested to
save the Dynon Avionics Diagnostic File from each of your SkyView displays as each
display can sometimes contain different diagnostic data. If you save the Dynon Avionics
Diagnostic File from multiple displays onto the same USB flash drive, use the 33-
character name field to distinguish the two (2) files, such as naming one (1) “LEFT” and
the other one (1) “RIGHT.”
If Dynon Avionics Technical Support has requested that you send a Dynon Diagnostic
File, go to http://www.dynonavionics.com/docs/upload.html to transmit the file to Dynon
Avionics. Please reference any previous communications with Dynon Avionics Technical
Support such as Case number, RMA number, etc.