Dynon SkyView HDX - Record of Revision

SkyView HDX System Installation Manual - Revision E i
Record of Revision
REV
DATE
ECO
DESCRIPTION
A
3/5/2018
Initial Release
B
9/31/2018
312857
Added Second Display, VHF COM, AP Panel, Knob
Panel. Also added more specific instructions on
mounting SkyView HDX per STC02594SE
C
4/4/2019
326312
• Created Section 8.5.22 Landing Gear Position
Indication
• Revised Landing Gear information in Section 8.6
Contacts to address logic change for landing gear to
include GEAR 1, GEAR 2, GEAR 3, and GEAR 4
• Adjusted formatting on title page
• Updated references table
D
7/2/2019
327067
• Revision Bars indicate new information or significant
changes to existing information
• Revised Table 64 - SV-COM-PANEL D15M Pinout to
meet SV-COM-X83 Transciever wiring requirements
• Added Section 2.0: Instrument Panel Design
• Added Section 2.1: Regulatory Considerations
• Added Section 2.2: Volumetric Requirements
• Section 1 (old) moved to forematter content
• Section 1.10 (old) removed because content
outdated
• Section 2.1-5 (old) moved to Section 1 (new)
• Section 2.6 (old) removed because content outdated
• Section 2.7 (old) renamed and moved to Section 1.15
(new)
• Added Section 3.1 (new): Avionics Tray Installation
• Sections 3, 6, 8-19 re-organized to better match
typical order of assembly
• Sections 4.10-13 (old) removed because content
outdated
• Section 5 (old) moved to Section 21 (new)