3/9
3. Mode
35220
35220
Maintenance
*1. Shown only if the print sorter unit (10-inch type) is supported.
!
!!
! Colorimeter Unit (common to all specifications)
5 DARK/LIGHT Paper Guide Open Sensor
*1
DARK Home position (upper)
6 DARK/LIGHT Paper Guide Close Sensor
*1
DARK When the paper guide closes (when the paper
width below 152 mm is processed)
No. Display Status
1 DARK/LIGHT Paper Sensor 1 DARK Paper is detected.
2 DARK/LIGHT Paper Sensor 2 DARK
2 ON/OFF Colorimeter detection ON When Colorimeter Unit is detected
No. Display Status
Distributed by: minilablaser.com
To Next Page
Loading...