4. Troubleshooting
40700
2/6
40700
Attention message: SM replenishment
No. 00701[SM]
Attach the Replenishment Package.P-#
Attention message release
YES or automatic release
• When the replenishment package is set, this attention message will be automatically closed and attention message No. 703 Would you
like to initialize the remaining amount of the Replenishment Package? appears.
Condition
Diagnosis
NOTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
Suffix number Condition
00001 Replenishment package sensor P-1 turns off.
00002 Replenishment package sensor P-2 turns off.
Adjustment failure point Manual No.
Failure in the attaching position adjustment of the replenishment package sensor
☞63300
Failed part Manual No.
Replenishment package sensor ☞63300
SM I/O PCB
☞66600
Processor control PCB ☞66200
Distributed by: minilablaser.com
To Next Page
Loading...