Error message: Printer 2
1/33
4. Troubleshooting
46100
46100
Error message: Printer 2
No. 06101
Paper Hold Motor operation error.
Error message release
NO
Condition
IMPORTANT
• If the paper supply unit is not set correctly, this error may occur.
Check Point
Diagnosis
$ Symptoms due to connection failure of wiring/symptoms resulted from blowout of fuse
NOTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
Suffix number Condition
00001 The paper hold sensor does not turn DARK from LIGHT even though a specified time has elapsed after starting
the paper hold motor operation.
00002 The paper hold sensor does not turn LIGHT from DARK even though a specified time has elapsed after starting
the paper hold motor operation.
1 Confirm that the paper supply unit is installed correctly.
Detection failure Manual No.
Paper hold sensor ☞ 63060
Printer I/O PCB 2 ☞66030
Printer I/O PCB 1
☞66020
Printer control PCB ☞66000
Operation failure Manual No.
Paper hold motor
☞63060
Printer I/O PCB 2 ☞66030
Printer I/O PCB 1 ☞66020
Printer control PCB
☞66000
Symptoms due to the wiring connection failure Symptoms of fuse blowout
☞4202 −−
Distributed by: minilablaser.com
To Next Page
Loading...