3/4
5. Operation sequence
56100
56100
Processor paper advance operation
2. Paper is output to the print receiving tray (large)/long length print tray.
NOTE
• The long length print tray must be installed to accommodate prints with an advance length of 457.3 mm or over.
• Maximum capacity of print receiving tray (large)/long length print tray
• Component status a specified amount of time after the dryer lane select sensor detects the trailing edge of the last sheet
of paper.
Processor drive motor: OFF
Dryer fan: OFF
Dryer heater: OFF
Receiving tray Maximum capacity
Print receiving tray (large) 50 prints
Long Length Print Tray 10 prints
Paper advance direction
A specified time
Dryer lane select solenoid: ON
Dryer lane select solenoid: ON
Dryer lane select solenoid: OFF
A specified time
Dryer rack
Dryer lane select sensor
Lane select guide: print conveyor
Lane select guide: print receiving tray (large)
G082005
Distributed by: minilablaser.com
To Next Page
Loading...