2. Replacement and adjustment of parts
25910
3/3
25910
Exposure advance unit
Paper with an
advance length of
914 mm
At the center part of the
paper (around the position of
450 mm)
IMPORTANT
• This banding appears
when the paper
supply unit cam
releases pressure
while the paper with
paper advance length
of 914 mm is being
exposed.
Position adjustment failure of the paper
supply unit cam
Adjust the position of the
cam of the paper supply
unit.
See 25630
☞Checking
after
adjustment
Print condition Banding position Status Corrective action Refer to
Distributed by: minilablaser.com
To Next Page
Loading...