APPENDIX I: FACTORY DEFAULT CONFIGURATION I.1 FACTORY DEFAULT SETTINGS
GEK-106310-AF F650 DIGITAL BAY CONTROLLER i-27
Default Value Selection Default Value X OFF N/A [OFF – ON – LATEST OFF –
LATEST ON]
Note: X is the Remote Device index, up to 32
LIST OF TIME OVERCURRENT CURVES AVAILABLE IN F650
IEEE extremely/very/moderately inverse
IEC Curve A/B/C/Long-Time Inverse/ Short-Time Inverse
IAC extremely/very/normally/moderately inverse
ANSI extremely/very/normally/moderately inverse
I2t
Definite time
Rectifier curve
User Curve - FlexCurve™ A/B/C/D
To Next Page
Loading...