4-48 F650 DIGITAL BAY CONTROLLER GEK-106310-AF
4.2 HUMAN-MACHINE INTERFACE (HMI) CHAPTER 4: INTERFACES, SETTINGS & ACTUAL VALUES
(*) This menu changes as indicated in table 4.35 for firmware version 7.50 or above.
Neutral TOC > Neutral TOC 1..3
Neutral IOC > Neutral IOC 1..3
Neutral Dir > Neutral Dir 1..3
Ground Current >
Ground TOC > Ground TOC 1..3
Ground IOC > Ground IOC 1..3
Ground Dir > Ground Dir 1..3
Sens. Ground Curr >
Sens. Ground TOC. > Sens. Ground TOC 1..3
Sens. Ground IOC > Sens. Ground IOC 1..3
Isolated Gnd IOC > Isolated Gnd IOC 1..3
Sens. Ground Dir. > Sens. Ground Dir. 1..3
Neg. Seq. Current >
Neg. Seq. TOC > Neg. Seq. TOC 1..3
Voltage Elements >
Phase UV > Phase UV 1..3
Phase OV > Phase OV 1..3
Neutral OV High > Neutral OV High 1..3
Neutral OV Low > Neutral OV Low 1..3
Neg. Seq. OV > Neg. Seq. OV 1..3
Auxiliary OV > Auxiliary OV 1..3
Auxiliary UV > Auxiliary UV 1..3
Power>
Forward Power > Forward Power 1..3
Directional Power > Directional Power 1..3
Watt Gnd Flt High > Watt Gnd Flt High 1..3
Watt Gnd Flt Low > Watt Gnd Flt Low 1..3
Control elements >
(*) See note
Setting Group
Underfrequency > Underfrequency 1..6
Overfrequency > Overfrequency 1..6
Synchrocheck
Autoreclose
Breaker Failure
VT Fuse Failure.
Broken Conductor > Broken Conductor 1..3
Locked Rotor > Locked Rotor 1..3
Fq Rate of Change Fq Rate of Change 1..3
Load Encroachment Load Encroachment 1..3
Max. Num of starts
Cold Load Pickup
PLC Timer Masks
MAIN SETTINGS
MENU
FIRST LEVEL SECOND LEVEL THIRD LEVEL
To Next Page
Loading...