5-32 F650 DIGITAL BAY CONTROLLER GEK-106310-AF
5.3 SYSTEM SETUP CHAPTER 5: SETPOINTS
or output the unit will not show this change until has returned to ready mode. For example, if an output is closed and the
unit goes to the Out of Service state, the output is kept closed even if the state that closed it changes and would otherwise
open the output. When the unit goes out of the Out of Service state, the output is then opened.
Functions affected by Out of service State
- IO Boards.
- Protection functions
o Current:
• Phase IOC Low (50PL)
• Phase IOC High (50PH)
•Phase TOC High (51PH)
• Phase TOC Low (51PL)
• Phase Dir (67P)
• Thermal Model (49)
• Ground TOC (51G)
• Ground IOC (50G)
• Ground Dir (67G)
• Neutral TOC (51N)
• Neutral IOC (50N)
• Neutral Dir (67N)
• Senstv Gnd TOC (51SG)
• Senstv Gnd IOC (50SG)
• Sensitive Gnd Dir (67SG)
• IS Ground IOC (50IG)
• Neg Seq TOC (46)
• Neg Seq Dir (67I2)
o Voltage:
• Auxiliary OV (59X)
• Voltage Unbalance (60V)
•Phase UV (27)
• Neutral OV High (59NH)
• Neutral OV Low (59NL)
• Neg Seq OV (47)
• Auxiliary UV (27X)
•Phase OV (59)
o Power:
• Forward Power (32FP)
• Directional Power (32DIR)
• Watt Gnd Flt Low (32NL)
• Watt Gnd Flt High (32NH)
o Frequency:
To Next Page
Loading...