9-14 F650 DIGITAL BAY CONTROLLER GEK-106310-AF
9.1 FIRMWARE UPGRADE VERSIONS BELOW 7.00. CHAPTER 9: BOOTCODE AND FIRMWARE UPGRADE
Figure 9-4: Relay serial number
5. If the relay is not an enhanced model or one with control functionality, click Upgrade
Firmware to continue the
process (see the following figure).
At this point, proceeding with the upgrade erases all data stored in the equipment, including the calibration settings in
firmware versions below 1.50. It is necessary to save all settings to a file now if you have not already done so.
To Next Page