D-16 F650 DIGITAL BAY CONTROLLER GEK-106310-AF
D.6 IEC 60870-5-104 INTEROPERABILITY APPENDIX D: IEC 60870-5-104 PROTOCOL
Either the ASDUs of the set <45> – <51> or of the set <58> – <64> are used.
System
information in monitor direction
(station-specific parameter, mark with an “X” if it is only used in the standard direction, “R” if only used in the
reverse direction, and “B” if used in both directions).
System information in control direction
(station-specific parameter, mark each Type ID "X" if it is only used in the standard direction, "R" if only used in
the reverse direction, and "B" if used in both directions).
To Next Page
Loading...