Gemalto CINTERION BGS2T - Page 253

BGS2T AT Command Set
10.4 AT^SISS
BGS2T_ATC_V01.301 Page 253 of 554 1/31/12
c
Syntax
Parameter Description
Internet service profile identifier.
The <srvProfileId> is used to reference all parameters related to the same service profile. Furthermore,
when using the AT commands AT^SISO, AT^SISR, AT^SISW, AT^SIST and AT^SISC the <srvProfileId>
is needed to select a specific service profile.
0...9
Internet service profile parameter.
srvType Type of Internet service to be configured with consecutive usage of AT^SISS.
For supported values of <srvParmValue> refer to <srvParmValue-srv-
Type>.
alphabet Selects the character set for input and output of string parameters within a pro-
file.
The selected value is bound to the specific profile. This means that different
profiles may use different alphabets. Unlike other parameters the alphabet can
"pCmd" mandatory
"pNumber" optional
"pLength" optional
"pDelFlag" optional
"tcpMR" optional
"tcpOT" optional
Test Command
AT^SISS=?
Response(s)
OK
Read Command
AT^SISS?
Response(s)
^SISS: <srvProfileId>, <srvParmTag>, <srvParmValue>
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SISS=<srvProfileId>, <srvParmTag>, <srvParmValue>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last
- + + + + - -
<srvProfileId>
(num)
<srvParmTag>
<srvParmTag> Mandatory or optional
Confidential / Released