BGS2T AT Command Set
13.5 AT+CMGL
BGS2T_ATC_V01.301 Page 377 of 554 1/31/12
c
Notes
• The selected <mem1> can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA-
TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types.
TE application can recognize the response format by examining the third response parameter.
• The parameters <ra> and <tora> will only be displayed if parameter <mode> of the AT^SSCONF command
is set to 1.
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 19.1, Restricted access to SIM data after SIM PIN authentication for further detail.
To Next Page
Loading...
