4200-900-01 Rev. K / February 2017 Return to Section Topics 3-153
Model 4200-SCS User’s Manual Section 3: Common Device Characterization Tests
SharedPulseTerminals(int) Number of pulse channels that are paired with a SMU.
This parameter is used with SharedPulseTerminals.
See Figure 3-89 and Figure 3-95 for examples of a
SMU and VPU sharing a cable to a DUT terminal.
SharedPulseTerminals(char *) A list of pulse channels that each share a cable
with a SMU. The list for two channels on the lowest
numbered VPU would be: VPU1CH1,VPUCH2. There
are no spaces or quotation marks in the string. See
Figure 3-89 and Figure 3-95 for examples of a SMU
and VPU sharing a cable to a DUT terminal.
OpenAll(int) Value for ConPin test that determines if all matrix switch points are
opened, before the desired switch point closures.
Using OpenAll = 1 essential resets the switch to an all
open state, then the desired switches are closed.
Error codes
0No Errors
-16001 Invalid number of pulse terminals
-16002 PulseVoltagesSize has to match the number of pulse terminals
-16003 PrePulseDelaysSize has to match the number of pulse terminals
-16004 TransitionTimesSize has to match the number of pulse terminals
-16005 PulseWidthsSize has to match the number of pulse terminals
-16006 PostPulseDelaysSize has to match the number of pulse terminals
-16007 Invalid number of bias SMU terminals
-16008 Invalid name of shared pulse terminals
-16009 Required bias SMU is not available in current configuration
-16010 Required shared SMU is not available in current configuration
-16011 Required VPU is not available in current configuration
-16012 PrePulseDelay value is out of valid range
-16013 PrePulseDelay value has to be in 10 ns increments
-16014 TransitionTime value is out of valid range
-16015 TransitionTime value has to be in 10 ns increments
-16016 Pulse level value is out of valid range
-16017 Pulse width value is out of valid range
-16018 PostPulseDelay value is out of valid range
-16019 PostPulseDelay value has to be in 10 ns increments
To Next Page
Loading...