Keithley 4200-SCS - Changing KITE Startup Behavior

3-12 Return to Section Topics 4200-900-01 Rev. K / February 2017
Section 3: Common Device Characterization Tests Model 4200-SCS User’s Manual
Changing KITE startup behavior
To stop the Default project from opening automatically when starting KITE or to
change the project that opens when starting KITE, perform the following steps
(see Figure 3-9).
To change KITE startup behavior:
1. Select the KITE Tools… Options… menu item.
2. To change which project opens when starting KITE, click the Change button and change
the default KITE project.
3. To stop any default project from opening when staring KITE, uncheck the Load Default
Project checkbox.
See the Reference manual, Customizing KITE, page 6-336 for further details on
configuring KITE behavior.
Figure 3-9
KITE options workspace settings