Keithley 4200-SCS User Manual

2-28 Return to Section Topics 4200-900-01 Rev. K / February 2017
Section 2: Model 4200-SCS Software Environment Model 4200-SCS User’s Manual
Figure 2-18
Contents of the Keithley Device file new-mosfet.kdv
Table 2-3 describes each line of the new-mosfet.kdv file that appears in Figure 2-18.
Projects subdirectory
The Projects subdirectory contains the default KITE project library that is provided with each
version of KTE Interactive. By default, you can store KITE projects in this directory. However, KITE
projects can be stored in any location, using the KITE File
> Save Project As menu.
Projects are comprised of multiple files stored in a predefined directory structure. All of the project
components are stored in a project folder. Figure 2-19 shows the folders of KITE projects that are
included with KTE Interactive. The expanded default project folder shows the pre-defined
project file structure.
Table 2-3
Line-item descriptions for a .kdv file
Line-item example Description
[Bitmaps]
Location of bitmap file information.
Small=new-mosfet.bmp
Name of file to use when displaying the device in the KITE
project navigator.
Big=new-mosfet-big.bmp
Name of file to use when displaying the device on a KITE
ITM definition tab.
[Terminals]
Location of terminal-label information.
Number=3
Number of device terminals (8 maximum).
Orientation=;N:Drain;S:Source;W
:Gate
Geographic, or screen, location and name of each device
terminal. Valid locations are as follows:
• N North or top
• NE Northeast or upper right
• E East or right
• SE Southeast or lower right
• S South or bottom
• SW Southwest or lower left
• W West or left
• NW Northwest or upper left

Keithley 4200-SCS Specifications

General

Brand	Keithley
Model	4200-SCS
Category	Semiconductors
Language	English