Keithley 4200-SCS User Manual

2-22 Return to Section Topics 4200-900-01 Rev. K / February 2017
Section 2: Model 4200-SCS Software Environment Model 4200-SCS User’s Manual
Tests (ITMs and UTMs)
• A check mark can be inserted or removed for any test.
• Inserting a check mark for a test also inserts a check mark for its device plan, its subsite
plan, and the project plan.
Device plan
• Clearing a check mark for a device plan also clears the check marks for all of its subordinate
tests.
• Inserting a check mark for a device plan also inserts check marks for all of its tests.
• Removing the check marks for all the tests in the device plan, also removes the check mark
for the device plan.
Subsite plan
• Removing a check mark for a subsite plan also removes the check marks for all of its device
plans and tests.
• Inserting a check mark for a subsite plan also inserts check marks for all of its device plans
and tests.
• Removing the check marks for all the tests in the subsite plan, also removes the check mark
for the subsite plan.
Initialization and termination steps
• Removing a check mark for initialization or termination steps also removes the check marks
for all of its UTMs.
• Inserting a check mark for initialization or termination steps also inserts check marks for all
of its UTMs.
• Removing the check marks for all the UTMs in the initialization or termination steps, also
removes the check mark for the initialization or termination steps.
Project plan
• Removing a check mark for a project plan also removes the check marks for all of its plans
and tests.
• Inserting a check mark for a project plan also inserts check marks for all of its plans and
tests.
• Removing the check marks for all the tests in the project, also removes the check mark for
the project plan.
NOTE Reference manual, Figure 6-16 shows an example of project plan structure that
shows a mix of enabled and disabled tests.

Keithley 4200-SCS Specifications

General

Brand	Keithley
Model	4200-SCS
Category	Semiconductors
Language	English