Keithley 4200-SCS User Manual

3-10 Return to Section Topics 4200-900-01 Rev. K / February 2017
Section 3: Common Device Characterization Tests Model 4200-SCS User’s Manual
Leveraging the default project
CAUTION It is strongly suggested that you do not modify the default project itself,
but rather copy the entire project or individual test to another KITE project
before making modifications.
All modifications to any KITE Default project will be lost when upgrading the
4200-SCS software to a new version. All customer-created KITE projects and
data will not be deleted or modified in any way when upgrading the 4200-SCS
software or uninstalling KTE Interactive. See the Model 4200-SCS Release Notes
(Installation Instructions) in the Model 4200-SCS Complete Reference for details
on all Default KITE projects. See “Accessing the release notes” on page 1-46 for
more information.
Copying entire KITE project
The entire Default project (or any KITE project for that matter) can be copied in its
entirety in one step. After opening the default project, select the menu item File,
Save Project As. (see Figure 3-7).
Figure 3-7
Copying entire KITE project
After entering a new project name, click the OK button. This will copy the entire
KITE project to another KITE project and will include all test definitions, formulas,
graph settings, and data (by default).

Keithley 4200-SCS Specifications

General

Brand	Keithley
Model	4200-SCS
Category	Semiconductors
Language	English