Keithley 4200-SCS User Manual

4200-900-01 Rev. K / February 2017 Return to Section Topics 3-11
Model 4200-SCS User’s Manual Section 3: Common Device Characterization Tests
Copying the default project first will preserve the original default project and allow
you to add tests, delete tests, and modify tests without affecting the default
project.
Copying individual tests using the test library manager
Individual tests can be copied to test library and then copied into another project
by performing the following steps (see Figure 3-5).
To copy individual tests using the test library manager:
1. Double-click the device node that is the parent of the test you want to copy.
2. Select one or more tests from the Test Sequence Table (hold down the Shift or Ctrl key
while clicking with the mouse to select multiple tests) (see Figure 3-8).
3. Click the Submit or Submit As buttons to submit the tests to a test library
4. Create a new KITE project or open a different KITE project
5. Double-click the device node you want to copy the test to.
6. Select one or more tests from the test library and copy or copy as the library tests to the
KITE project.
See the How to display and manage test results, page 2-24 or the Reference
manual, Keithley Interactive Test Environment (KITE), page 6-1 for further details
on managing KITE tests and projects.
Figure 3-8
Selecting multiple tests

Keithley 4200-SCS Specifications

General

Brand	Keithley
Model	4200-SCS
Category	Semiconductors
Language	English