Leibinger JET3 up - Figure 43 Set Measuring Unit

Page 126 Job Editor Group 8
Release R1.06 JET3up
Proceeding:
 Press on the tab <Language/Unit> (2) to select the tab.
 Press on the arrow key of the accordant drop-down list. The drop-
down list
opens for selection.
 Now select the requested language or the requested keyboard font.
3. Measuring unit:
The two different measuring units „mm“ and „inch“ are available.
Figure 43 Set measuring unit
1 – Dialog box <Basic Settings>
3 – Drop-down list <Measuring unit>
2 – Tab <Language/Unit>
Proceeding:
 Press on the tab <Language/Unit> (2) to select the tab.
 Press on the arrow key of the drop-down list <Measuring unit> (3)
. The
drop-down list opens for selection.
 Now select the requested measuring unit.
2
1
3