Leibinger JET3 up - Figure 92 Interface Settings; Interface Settings

Page 198 Job Editor Group 8
Release R1.06 JET3up
7.5.4 Interface settings
The dialog box <Interface settings> offers several options for the configuration of
the available interfaces.
Figure 92 Interface settings
1 – Open <Interface settings>
6 – Port settings <Ethernet interface>
2 – Options for the
<Communication interface>
7 – Settings <Serial interface>
3 – Options for the
<Communication protocol>
8 – Parity settings for <Serial interface>
4 – <Disabled> interfaces
9 – Baudrate settings for <Serial interface>
5 – Settings <Ethernet> interface
1
2
3
4
5
7
6
8
9