Leibinger JET3 up - Figure 120 - Job Editor (Formatting Tool); Formatting Tool

Page 238 Job Editor Group 8
Release R1.06 JET3up
8.2.4 Formatting tool
With the button <Format> you can select the formatting tool <Object> (2).
Further more you can also select the tool directly with the accordant Icon (3).
With the tool you can assign several object settings (e.g. font, contrast, alignment,
etc.) to the selected printing elements. The displayed dialog box refers to the
selected printing element (e.g. text, graphic, barcode, etc.).
Figure 120 Job editor - Format tool
or
1 – Button <Format>
3 – Direct button (shortcut)
2 – Formatting tool <Object>
INFORMATION
Please see the chapter
8.4 Object settings
for details about object
settings.
1
2
3