Group 8 Job Editor Page 81
JET3up Release R1.06
6.5.3 Switch on device
6.5.3.1 Switching on without password protection
Proceeding:
Touch the dark Touch-Display (1) for at least 2 seconds.
The device is turned on and the main window (2)
is displayed with the message
<Initialization> (3).
Aft
er the initialization the device starts with the bleeding of the system
automatically.
During the process the message <Bleeding> (4) is displayed. The bleeding
takes between 1 – 5 min. The process can be canceled by pressing the button
<Cancel> (5).
Note:
For starting the device the job which has been used at last will be loaded
automatically.