Group 8 Job Editor Page 319
JET3up Release R1.06
8.7.2.2 Carry out replacements
Further more accordant substitutions (numbers, letters or designations) for the date-
and time values can be generated on the tab <Replacements> to get an operating-
specific display or coding of the specifications.
You will find further information regarding the execution of
substitutions in the chapter 8.8 Replacements
8.7.3 Counter
Provides bonding of individual programmable counters as well as definition of
counter parameters, font parameters and display options.
Further more accordant replacements (number or letters) can be generated to get a
operating specific display or coding of the specifications.
Attention! Leaving a job, the counter states of job counters are
usually not saved, that means if you re/open the job the counter
readings will be set to the start value. If the print should be continued
with the last counter readings you have to define the respective
counter as <Global counter>
You will find further information also in chapter 8.7.3.1.13 Global
counter
To Next Page
Loading...
