Leibinger JET3 up - Service Works; Service TAG Activation Procedure

Page 54 Transport/Start up Group 5
Release R1.06 JET3up
5.4.3 Carry out filling routine – Step 3
After filling the consumables you have to carry out the filling routine.
Proceeding:
Figure 10 Filling routine (Step 1)
1 – TFT-Touch-Display
5 – Tab <Spec. func. /Tools>
2 – Message <Initialization>
6 – Button <Fill up Routine>
3 – Message <Emergency Shutdown
7 – Message <Fill up Routine>
4 – <OK> Button
8 – <next> Button
1
2
3
4
5
7
6
8