Leibinger JET3 up - Figure 119 - Job Editor (Craetion Tools); Object Creation Tools

Group 8 Job Editor Page 237
JET3up Release R1.06
8.2.3 Object creation tools
With the button <Insert> you can select tools to create printing elements (texts,
graphics, counters etc.). Further more you can also directly select the several tools
with the available Icons (direct buttons).
Figure 119 Job editor – Object creation tools)
1 – <Insert> Button
2 – <Text> tool
3 – <Barcode> tool
4 – <Graphic> tool
5 – <Date/Time> tool
6 – <Counter> tool
7 - <Shift Code> tool
8 – <Extern Text> tool
9 – Direct buttons (Icons)
Pos.
Icon
Tool
Function
2.
Text
Provides the creation of text elements.
3.
Barcode
Provides the integration of barcodes and defines
the certain parameters.
4.
Graphic
Provides the integration of an already existing
graphic and defines the accordant parameters.
5.
Date/Time
Provides the integration of date- and time
specification and defines the accordant parameters
and requested replacements.
6.
Counter
Provides the integration of a counter as well as the
definition of the accordant parameters and
requested replacements.
7.
Shift Code
Provides the integration of a text element which is
printed by predefined periods (shifts of time) as
well the definition of the accordant parameters..
8.
Extern(al)
Text
Provides the integration of an external text as well
as the definition of the accordant parameters.
By usage of this function an easy possibility is
offered to integrate variable data in the printing
text without any additional software- and
programming works.
1
2
3
4
5
6
7
8
9