Leibinger JET3 up - Figure 133 Settings for Prompt Field; Prompt Field

Group 8 Job Editor Page 257
JET3up Release R1.06
8.4.7 Prompt field
This function provides a fast access to editable objects.
The following objects can be defined as <Prompt fields>:
Object type
Editability
Text object
Text content
Barcode object
Barcode content
Counter object
Counter initial value
Time/Date object only if declared as
expiry date*
Days or months before expiration
* There has to be set a value >0 for the expiry date offset. Otherwise the
prompt function is not available for a date or time object.
Depending on the object type the editability is different. If an object is declared as
a <Prompt field>
it is possible to edit it without entering the editor. The editing
can be done directly on the WYSIWYG screen.
Figure 133 Settings for prompt field
JET3up job editor
Text object in the JET3up job editor
Object
To use an object as a <Prompt field>
select the object in the JET3up job
editor and open the object settings
menu
Global object settings
Declaring an object as a <Prompt field>
Check box - Use as <Prompt field>.
Checking this box opens a text enry
field to assign a name to the <Prompt
field>. Prompt fields have to be named
for a better handling in case you are
working with more than one <Prompt
field>.
1. Select text object
2. Open objects settings menu