Leibinger JET3 up - Figure 129 Object Settings (ICG); ICG-Value (Inter Character Gap)

Page 250 Job Editor Group 8
Release R1.06 JET3up
8.4.3 ICG-value (Inter Character Gap)
ICG stands for Inter Character Gap. The setting determines the distance between
the several characters. As larger the character distance has been selected, as more
„Blank strokes“ are inserted between the single characters.
The value can be set between 0 – 7.
Example
0 = no distance between the characters
1 = 1 blank stroke is generated between the characters
…..
7 = 7 blank strokes are generated between the characters
The currently value set is shown in the respective input field.
Explanation:
One vertical movements of the
ink jet is called a stroke.
A printout consists of a number
of continuous strokes.
Figure 129 Object settings (ICG)
Printout:
ICG=0
ICG=1
ICG=7
ICG
ICG
Example: