Leibinger JET3 up - Figure 110 Info Dialog Box; Information> Dialog Box

Group 8 Job Editor Page 227
JET3up Release R1.06
7.6.1 <Information> dialog box
Figure 110 Info dialog box – Page 1
1 – Current <System frequency> and
<nozzle size>
11 – Reference values for drop
break-off voltage and time
2 – Currently used ink type
12 – Indicators for ink and solvent
levels
3 – Currently used solvent type
13 – <Export> of the <Info> data
4 – <System pressure> Actual/nominal
14 – <Contact Details>
5 – <Viscosity> Actual/nominal
15 – Number of the <Total drops>
6 – Actual output of the <suction pump>
in [%] of the nominal output
16 – Number of the <Total prints>
7 – Current <Viscosity correction factor>
17 – <Total working hours>
8 – Current position of the <Diaphragma>
18 – The date of the last Service
9 – Mixing ration solvent/ink. 0 = currently
no solvent is admixed
19 – Working hours since last
service
10 – Current drop break-off:voltage and time
20 – <Close> button
1
2
3
4
5
6
7
8
9
10
12
14
15
16
17
18
13
20
19
11