Leibinger JET3 up - Job Editor - File Management; Save Job;Save Job as

Page 242 Job Editor Group 8
Release R1.06 JET3up
8.3 Job editor – File management
In the job management the following submenus are available:

Save Job

Save Job as

Close Editor
 Load Job to print
8.3.1 Save job/Save job as
With the option <Save Job>, a job which opened for editing is saved under the
current name.
With the option <Save Job as>,
a job which opened for editing or a new created
job can be saved under a new or particular name.
ATTENTION
There will be no confirmation prompt if a job is saved under an
already existing file name An already existing file will be overwritten
without any further notice.
Proceeding:
 Press the button <Job> (1) and the option <Save Job as> (2).
 The window <Save Job> (3) is faded in.
 The names of the already existing graphics are displayed in the data file
selection field (4). With the drop-down list <Search in> (5) you can select the
different memory devices.
 Click in the display <Filename> (6). A keyboard field (7) opens for input.
INFORMATION
You will find further information regarding the operation with
keyboard in chapter 6.4.2 Keyboard

Enter the requested name.
 Press the button <Enter> (8)
of the keyboard field. The entered name is taken
over to the display <name> (6).
 Press the button <Save> (9)
to finish the saving process or press the button
<Cancel> (10) to abort the process.