Leibinger JET3 up - Figure 101 - Object Settings - Orientation and Mirroring; Orientation and Mirroring

Group 8 Job Editor Page 251
JET3up Release R1.06
8.4.4 Orientation and mirroring
The settings for the <Orientation> and <Mirroring> of an object are combined.
Objects can be rotated by 90°/180° or 270° and the result can be vertically
mirrored. Therefore there are 8 combinations available.
Figure 130 Object settings - Orientation and mirroring
1
Not rotated
Not mirrored
2
Not rotated
Vertically mirrored
3
Rotated by 180°
Vertically mirrored
4
Rotated by 180°
Not mirrored
5
Rotated by 90°
Vertically mirrored
6
Rotated by 270°
Not mirrored
7
Rotated by 90°
Not mirrored
8
Rotated by 270°
Vertically mirrored