Leibinger JET3 up - Extern Text: Variable Length; Extern Text: Variable Length - Interface Settings; Extern Text: Variable Length - Object Creation and Properties

Group 8 Job Editor Page 343
JET3up Release R1.06
8.7.5.2 Extern Text: variable length
8.7.5.2.1 Extern Text: variable length – Interface settings
The interfa
ce settings for an extern text of variable length are the same as for the
extern text with fixed length.
INFORMATION
Please see chapter 8.7.5.1.1 Extern Text: fixed length – Interface
settings
8.7.5.2.2 Extern Text: variable length – Object creation and properties
See figure 177
In the job editor you can create an <Extern Text> object either with the <Insert>
drop-down menu (1) or with the direct button (shortcut) for <Extern Text> (2).
This will open the dialog box for the object settings (3).
On the tab <Global settings> (4) you can enter the font settings (5), select font
options (6) or define the positioning of the object (7).
INFORMATION
For details about the global settings of an object please see chapter
8.4 Object settings
On the tab <Extern Text> you can choose the type of the extern text. The
following description refers to the option <Extern Text: variable length> (9). The
<Extern Text: fixed length> and the <Mailing> options are described separately.
The type <Extern Text: variable length>offers several options:
 Settings for double prints (10)
 Settings for start and end of text symbols (13-16)
 Settings for wildcards (11)
 Settings for an offset (12)