Page 230 Job Editor Group 8
Release R1.06 JET3up
Proceeding:
Configure the <Network ID> of the printer in the <Basic settings> (1)
and/or
Plug an USB-Stick into the USB-socket of the device (2).
Press the button <Export> (3).
If there is a <Network ID> configured and the network connection is
established a confirmation prompt will pop up asking whether the data shall be
saved to the network storage device (4). If this message is confirmed the
information will be stored on the network storage device. If the message is not
confirmed (<No> button) it is checked whether an USB stick is availabe. If no
USB stick is avaibe a respective message box pops up (5). With an USB stick
inserted the information is stored to the USB stick.
When the data is saved on the connected medium a confirmation message pops
up (6).
The message have to be confirmed with the <OK> button (7).
The files are saved in a folder named JET3UP_Log. If this folder does not
already exist it will be created by the <Export> function.
To Next Page
Loading...
