Leibinger JET3 up - Page 261

Group 8 Job Editor Page 259
JET3up Release R1.06
Overview Settings and Changes
Original settings are made in the respective object settings menus
Text object
Barcode object
The content of the text object is originally
set directly in the JET3up editor.
The content of a barcode object is
originally set in the object settings.
Counter object
Date object (Expiry date)
The content of a counter is originally set
in the object settings. The value that can
be changed using the <Prompt field> is
the <Initial value>.
The content of a date object is originally
set in the object settings. The value that
can be changed using the <Prompt
field> is the <Expiry Date Offset>.
New settings made by using the <Prompt field>
WYSIWYG Window and <Prompt
field> properties with the original
settings.
WYSIWYG Window and <Prompt
field> properties with the new
settings.
All changes can be made in one dialog box without entering the JET3up Editor!
1
3
2
4