Page 368 Setting-up/Maintenance Group 10
Release R1.06 JET3up
For correct handling the LEIBINGER re-filling system allows an odor- and splash free
refilling of the consumables.
The reservoir tanks should be not overfilled, that means a re-filling
should be only carried out if a certain message has been generated by
the printer!
Risk of fire and injury! Absolutely observe!
Before filling the device with the consumables, measures for the
electrostatic discharge have to be made!
Highly flammable! Burning gases and liquids may cause severe
burns. Keep sources of ignition away from the printer!
Always statically discharge the printer and yourself before filling
the reservoirs! Simply touch the housing of the printer to
discharge the equipment and stand on a grounded surface
wearing ESD shoes during filling!
Protective equipment is necessary! Read the safety data sheets
and the personal protective equipment rules and regulations!
The sealing of the refill bottle should be not opened!
To Next Page
