Page 76 Job Editor Group 8
Release R1.06 JET3up
Solvent filling level:
The indicator shows the current solvent filling level.
Button <PrintStart> (13): With this button the print job will be released for
processing. If a print job is activated, the button is displayed backlighted. It will be
printed as soon as a PrintGo signal occurs.
Print start inactive. Print job is not released for processing.
Print start active. Printer is in active print mode.
Button <PrintStop> (14): The released print job is stopped with this button. If a
print stop is activated, the button is displayed backlighted.
Print stop inactive
Print stop active. Current print job was stopped or no print job is
released for processing.
To Next Page
Loading...
