Lexmark T65 Series Service Manual

2-170 Service Manual
7462
Go Back
Previous
Next
Background (fog)
Step Check Yes No
1 Check the media condition.
Load new, dry, recommended media.
Re-print the defective image.
Does the error continue?
Go to step 2. Problem
resolved.
2
Check the media transfer route.
Is the media path free of contamination or debris.
Go to step 3. Remove debris
or
contamination.
3
Check the print cartridge for proper installation.
Is the above component properly installed?
Go to step 4. Inspect, clean
and reinstall
replace the print
cartridge.
4
Check the transfer roll assembly for contamination and
wear.
Is the above component free of excess wear and
contamination?
Go to step 5. Replace the
transfer roll
assembly.
Go to “Transfer
roll assembly
removal” on
page 4-53.
5
Check the HVPS card assembly for proper connection.
Is the above component connected properly?
Go to step 6. Replace the
connections.
6
Check the printhead installation.
Is the above component properly installed?
Go to step 7. Reinstall and
adjust the
printhead
assembly.
Go to
“Printhead
assembly
removal” on
page 4-32.
7
Perform a print test.
Does the problem remain?
Contact next
highest level of
tech support.
Problem
resolved.
Leading edge
Trailing edge

Lexmark T65 Series Specifications

General

Brand	Lexmark
Model	T65 Series
Category	Printer
Language	English