4-44 Service Manual
7462
Switch (media size) assembly removal
1. Remove the side cover, left. See “Side cover, left removal (models X651, X652, X654, and X656)” on
page 4-121 or “Side cover, left removal (model X658)” on page 4-120.
2. Remove the six screws (A) securing the metal cover to the machine.
3. Remove the metal cover.
4. Remove the media tray.
5. Gently place the machine on the left of right side.
6. Release the two hooks (B) securing the switch (media size) assembly to the machine.
7. Remove the switch (media size) assembly.
8. Disconnect the connection (C) from the switch (media size) assembly.
To Next Page
Loading...
Need help?
General
