3-32 Service Manual
7462
When the setting is Auto, every input option equipped with size sensing hardware automatically registers what
size media it contains. When the setting is Off, the media size detected by hardware is ignored. The media size
can be set by the operator panel or the data stream.
To change the size sensing setting:
1. Touch to select SIZE SENSING from the Configuration Menu.
2. The panel displays the setting's name in the header and [setting's current value] below the header
row. Touch or to change the setting. The selections are Auto and Off.
3. Touch Submit to save your change.
Touch Back to exit without changing the value.
Panel Menus
To change the Panel Menus setting:
1. Touch to select Panel Menus from the Configuration Menu.
2. The panel displays the setting's name in the header and [setting's current value] below the header
row. Touch or to change the setting. The selections are On and Off. The default is Enable.
3. Touch Submit to save your change.
Touch Back to exit without changing the value.
PPDS Emulation
This menu item allows the user to enable or disable PPDS emulation data stream. When this setting is
enabled, the following settings are also changed:
• SmartSwitch settings for each port are turned off.
• The printer language is changed to PPDS Emulation.
Users can still switch languages on the operator panel and through the PJL data stream.
To change the PPDS Emulation setting:
1. Touch to select PPDS Emulation from the Configuration Menu.
2. The panel displays the setting's name in the header and [setting's current value] below the header
row. Touch or to change the setting. The selections are On and Off. The default is Off.
3. Touch Submit to save your change.
Touch Back to exit without changing the value.
To Next Page
Loading...
Need help?
General
