Repair information 4-37
7462
Cover assembly, rear lower (X654, X656, and X658)
1. Open the rear lower door.
2. Remove the four screws (A) securing the cover assembly, rear lower to the machine.
3. Remove the cover assembly, rear lower.
Redrive motor assembly removal
1. Remove the laser cover. See “Laser cover removal (models X651, X652, X654, and X656)” on
page 4-103 or “Laser cover removal (model X658)” on page 4-101.
2. Remove the six screws (A) securing the metal cover to the machine.
To Next Page
Loading...
Need help?
General
