Lexmark T65 Series Service Manual

4-242 Service Manual
7462
Go Back
Previous
Next
4. Remove the LED sensor cover.
Offset stacker sensor (finisher media bin present) removal
1. Remove the offset stacker LED sensor cover. See “Offset stacker LED sensor cover removal” on
page 4-241.
2. Using a flat-blade screwdriver, release the tabs (A) on the sensor and remove it from the sensor cover.
3. Remove the harness connected to the media bin present sensor.
4. Remove the offset stacker sensor (finisher bin media present).
A

Lexmark T65 Series Specifications

General

Brand	Lexmark
Model	T65 Series
Category	Printer
Language	English