3-28 Service Manual
7462
Configuration menu (CONFIG MENU)
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold 2 and 6 buttons simultaneously.
3. Turn on the printer.
4. Release the buttons after 10 seconds.
Available menus
Note: Some menus are not available, depending on the configuration of the printer.
Maintenance Counter Value See “Maintenance Counter Value” on page 3-29
Reset Maintenance Counter See “Reset Maintenance Counter” on page 3-29
USB Scan to Local See “USB Scan to Local” on page 3-30
Print Quality Pages See “USB Scan to Local” on page 3-30
Reports
• Menu Settings Page
• Event Log
See “Reports” on page 3-31
SIZE SENSING See “SIZE SENSING” on page 3-31
Panel Menus See “Panel Menus” on page 3-32
PPDS Emulation See “PPDS Emulation” on page 3-32
Factory Defaults See “Factory Defaults” on page 3-33
Energy Conserve See “Energy Conserve” on page 3-33
Min Copy Memory See “Min Copy Memory” on page 3-34
NumPad Job Assist See “NumPad Job Assist” on page 3-34
Format Fax Storage See “NumPad Job Assist” on page 3-34
ADF Edge Erase See “ADF Edge Erase” on page 3-34
FB Edge Erase See “FB Edge Erase” on page 3-35
Scanner Manual Registration See “Scanner Manual Registration” on page 3-35
Disable Scanner See “Disable Scanner” on page 3-36.
Paper Prompts See “Disable Scanner” on page 3-36
Envelope Prompts See “Envelope Prompts” on page 3-36
Action for Prompts See “Action for Prompts” on page 3-37
Jobs On Disk See “Action for Prompts” on page 3-37
Disk Encryption See “Disk Encryption” on page 3-38
Wipe Disk See “Wipe Disk” on page 3-39
Font Sharpening See “Font Sharpening” on page 3-39
Require Standby See “Require Standby” on page 3-39
LES App[lications See “LES Applications” on page 3-40
Key Repeat Initial Delay See “Key Repeat Initial Delay” on page 3-40
Key Repeat Rate See “Key Repeat Rate” on page 3-40
Wiper Message See “Wiper Message” on page 3-40
Clear Custom Status See “Clear Custom Status” on page 3-40
To Next Page
Loading...
Need help?
General
