Diagnostic aids 3-31
7462
Reports
Menu Settings Page
To print the Menu Settings Page, touch to select Menu Settings Page from Reports. The message
Printing Menu Settings Page is displayed.
The following settings are printed:
Touch Back to return to the Configuration Menu.
Event Log
The event log provides a history of printer errors. The event log can only be printed in CONFIG MENU.
Additional options are available in DIAGNOSTICS. See “EVENT LOG” on page 3-25.
To print the event log:
1. Touch to select Event Log from Configuration Menu.
2. Touch to print the log. Printing EVENT LOG.. displays on the touchscreen.
3. Touch Back to return to EVENT LOG.
Note: An event log printed from the CONFIG MENU will not contain debug information or secondary codes for
900 service errors. However, the event log printed from DIAGNOSTICS mode does include this information.
SIZE SENSING
This setting controls whether the printer automatically registers the size of paper installed in an input source
with size sensing.
Maintenance Counter Value USB Scan to Local Print Quality Pages
Reports SIZE SENSING Panel Menu
PPDS Emulation Factory Defaults Energy Conserve
Min Copy Memory NumPad Job Assist Fax Storage Location
ADF Edge Erase FB Edge Erase Scanner Manual Registration
Disable Scanner Paper Prompts Envelope Prompts
Disk Encryption Wipe Disk Font Sharpening
Required Standby LES Applications Key Repeat Initial Delay
Key Repeat Rate Wiper Message Clear Custom Status
Paper source Size sensing
Tray 1 (integrated) X
Multipurpose feeder
250-sheet drawer X
550-sheet drawer X
2000-sheet drawer X
250-sheet duplex
550-sheet duplex
Envelope feeder
To Next Page
Loading...
Need help?
General
