Diagnostic aids 3-35
7462
3. Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
FB Edge Erase
The ADF Edge Erase and FB Edge Erase settings specify, in millimeters, the size of a border around the
scanned image that will be erased. For copies, the printed page will have a 2 mm no-print border. The larger of
the 2 mm no-print border and the Edge Erase setting will be used in this situation.
To change this setting:
1. Touch to select FB Edge Erase from the Configuration Menu.
The panel displays the setting's name in the header and [setting's current value] below the header
row.
2. Touch to increase the value or to decrease the value.
The values are 0 through 6. The default is 3.
3. Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
Scanner Manual Registration
To perform the Scanner Manual Registration:
1. Touch to select Scanner Manual Registration from the Configuration Menu.
The panel displays the following headers:
• Print Quick Test
• Copy Quick Test
• Flatbed
2. Touch Print Quick Test to print a registration page.
3. Choose the section of the scanner to align.
To align the scanner glass (flatbed):
a. Place the Quick Test page facedown on the scanner glass.
b. Touch Copy Quick Test.
The scanner prints a copy of the Quick Test page.
c. Touch Flatbed.
To Next Page
Loading...
Need help?
General
