3-88 Service Manual
7462
250 paper jam
1. Touch Status/Supplies to identify the location of the jam.
2. Remove the paper from the multipurpose feeder.
3. Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper.
Straighten the edges on a level surface.
4. Load the paper into the multipurpose feeder.
5. Slide the paper guide toward the inside of the tray until it lightly rests against the edge of the paper.
6. Touch Continue.
260 paper jam
Touch Status/Supplies to identify the location of the jam. The envelope feeder feeds envelopes from the
bottom of the stack; the bottom envelope will be the one that is jammed.
1. Lift the envelope weight.
2. Remove all envelopes.
To Next Page
Loading...
Need help?
General
