OM SYSTEM OM-1 Mark II - Page 112

Position the frame using the multi selector.
To re-center the frame, press the multi selector or press and
hold the OK button.
The frame can also be positioned using the arrow pad
(FGHI).
1
10231023
P
1 / 250
P
1 / F 250 5.65.6
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF 60p60p L
-
8L
-
8
L
1
4K
F
00
+
-
0.00.0
100 % 100 %
Off
Adjust the size of the zoom frame to choose the zoom ratio.
Press the INFO button and then use the FG buttons or
the front or rear dial to adjust the size of the zoom frame.
Press the OK button to accept and exit.
3 x
100 % 100 %
Press the button to which [8] is assigned once more.
The camera will zoom the selected area in to fill the display.
Use the front or rear dial to zoom in or out.
Use the multi selector to scroll the display.
Use FGHI to scroll the display.
3x3x
100 % 100 %
If the shooting mode is M (manual) or B (bulb) and [ISO
Auto] is not selected, you can press the INFO button during
zoom to choose aperture or shutter speed.
Press the 8 button to return to the zoom frame.
Press the OK button to end focus zoom.
You can also end focus zoom by pressing and holding the
8 button.
Bulb F 5.6Bulb 5.6 F
100 % 100 %
Exposure adjustment display
for modes M and B
Focus zoom applies to the display only. Pictures taken with the camera are not affected.
Zoom AF does not work during zoom display and when using a Four Thirds system lens.
When [nDigital Tele-converter] is [On] in movie recording mode, camera cannot zoom.
Pictures can also be taken during zoom frame AF display and zoom AF display.
Touch controls can be used for focus zoom. g“Shooting with touch screen operations” (P.54)
You can configure the camera to exit focus zoom when the shutter button is pressed halfway to
focus. g“Choosing What Happens When the Shutter Button Is Pressed During Live View Zoom
(LV Close Up Mode)” (P.359)
112
Zoom frame AF/Zoom AF (Super Spot AF)
2.
3.
4.
C
C
C
B
B
B